How To Put Backing on a Fly Reel? Useful guide With 3 tips

How to Put Backing on a Fly Reel

Looking to enhance your fishing experience and maximize your effectiveness? Imagine effortlessly keeping your lure in place while reeling it in, without any hassle or tangles. The secret lies in using a backing on your fly reel. By adding a backing to your setup, you ensure that your lure remains secure, even when multiple lines are connected. Curious about how to put backing on a fly reel? Let me guide you through the simple steps to elevate your fishing game and make every cast count.

In this article, we will learn not only what the backing is but also how to put a backing on the reel, so let’s begin.

Introduction: What is a Fly Reel? 

A fly reel is a device used to cast a fishing line. It is a common tool that has been around for centuries.

The fly reel is a crucial part of equipment for fishermen and fly-fishers. It allows the angler to make long casts by winding in line from a spool in the reel’s handle or body, then unwinding it with another action of pulling down on the handle or cranking the spool with their foot.

Fishermen do not only use fly reels, but also it is used by artists and photographers who need to create long exposures of their subjects without having to use tripods or other support devices.

How do Fly Reels Work?

A fly reel is a gear needed for fishing. It is a small device used to hold the line and keep it from tangling. It also helps cast the line out of the water by taking in the slack line.

A fly reel has a spool, which rotates around a center post. The spool has a handle and two or more arms attached to it, with thin wire or metal wires wrapped around it. Arms are then connected to an eye on one end of a rod and an eye on the other with a small piece of a thread linking them. Pulling back on one side takes in a slack line at its other end, making it easy to cast your line out without tangling up your fishing line.

What do you need to know about fly reels?

How to Put Backing on a Fly Reel

Fly reels are typically made of metal or plastic and have a spool that the line wraps around to store. They come in various sizes and designs with different features. For example, some fly reels have an anti-reverse system, so you can cast your line without stopping and reversing the reel whenever you want to change directions.

Why do People Put Backs on their fly reel?

Fly reels are a great piece of fishing equipment that helps fishermen to grab fish easily. But why do people put their backs on the reel? There are many reasons why people do this.

See also  Carbon Fiber vs Graphite Fishing Rod : 2 Rods Approved Guide

Some of them include

  • It is a way to show dominance and power over the fish.
  • It is a way to make the fish feel more comfortable and safe so that they will be more likely to take the bait.
  • It is a way to show off and be seen.
  • It is a way to scare others away from the fish so they will not have to fight for it.

How to Put a Backing on a Fly Reel?

Fly reels are essential equipment for any fishing enthusiast. They come in different sizes and shapes, but all have a similar function – holding the line while you reel it.

The material used to make fly reels is usually metal, making them durable and lightweight. The best part about fly reels is that they are easy to maintain, so you can take care of your gear without much effort.

The following steps show how you can put a backing on your fly reel :

  • Unscrew the handle from the reel.
  • Take out the spool from the handle and place it on top of an empty cardboard box or piece of paper so that it can stay visible.
  • Take out some tape from your tape dispenser and cover one end of the spool with it by wrapping around it three times for good measure. It is done as close to the center as possible.
  • Now, please take out a second piece of tape and cover one side of the spool with it, making sure you do this twice for good measure.
  • Now tape down the middle of the spool. It is done by applying the tape around the spool’s center three times. It would help if you did this as close to the center of the spool as possible and ensured it was tight. Next, please take out the third piece of tape and cover one end of the spool with it by wrapping around it three times for good measure.
  • Now, please take out the fourth piece of tape and cover one side of the spool with it, making sure you do this twice for good measure.
  • Finally, please take out the fifth piece of tape, and place it over the spool again, but this time make sure to do it three times in total.
  • Now you’re done! Just stick your spool on the side of your golf ball, and you are ready to go!

How to Choose Your Fly Reel Size for Successful Fishing?

Reel size for successful fishing

Fly reel size is an important consideration when it comes to fishing, as it can affect the success of your fishing trip.

The general rule is to choose a reel size appropriate for the fly line, rod, and your skill level. The reel should be long enough to comfortably cast and retrieve without stopping and re-casting.

See also  What Is Telescopic Fishing Rod? No. 1 Classified Guide

When choosing a fly reel, consider how much you are willing to spend on it. Some people are willing to pay more for a higher quality product that will last longer than others, looking for something cheap that will last them a short period.

What You’ll Need to Put Fly Reel Backing on in Minutes?

Fly reels are a common fishing tool for anglers. However, if you are careful, the backing can come off and save your day.

Fly reel backing is necessary for most fly reels because it helps them stay together and makes your cast smoother. You should apply fly reel backing when wet or muddy outside because the water will help adhere the material to your reel more easily.

How to Put Backing on a Fly Reel: Tips & Tricks

Fishing reel backing tips

Though it seems simple, fly reel backing can be tricky. Some tips can help you save money and time when re-spooling your line.

  • Make sure the fly reel is clean before you start. It will make it easier to wind up the line.
  • Use a sharp knife or scissors to cut off the old spool of the line from around the new spool so that they don’t get tangled together while you’re winding up your new spool.
  • Use less pressure when winding up your new line spool. Otherwise, it will take longer to unspool, and you’ll use more time and energy than necessary.


Understanding how to put a backing on a fly reel is an essential skill for any angler. Following a few simple steps, you can ensure your fly reel is properly prepared and ready for action. Starting with the right type and amount of backing, you can secure it to the spool using a reliable or arbor knot. By winding the backing onto the reel in an even and tense manner, you can avoid tangles or twists that could impede your fishing experience.

Lastly, completing the process by attaching the fly line to the backing ensures a solid connection and allows for seamless casting and retrieval. By mastering this technique, you can enhance your fly fishing experience and be better prepared to handle any challenges that may arise on the water.

Remember to practice and refine your skills over time; through experience, you will truly become proficient in putting the backing on a fly reel. So, grab your reel, spool up some backing, and prepare to embark on memorable fly-fishing adventures!


  1. How much backing do you put on a fly reel?

    According to an estimate, 100-125 yards of backing can be put on a reel and still have space to spool on your line and clearance from spool support. Also, the yards may be consumed depending on the width of the fly reel.

  2. What is the best knot to attach the fly line to the backing?

    Double surgeon’s loop is the most commonly used loop knot to join the fly line to the backing. You can tie it quickly and easily, as it is an overhand knot with two turns. Once you tie this loop, you can connect your backing to a fly line with a loop-to-loop connection.

  3. Is fly line backing necessary?

    Well, it’s always better to have a fly-line backing. Many reels have room for the backing of fifty yards to twenty pounds. This will increase the range of your fly line up closer to the edge of your fly reel.

  4. What is backing, and why is it necessary for a fly reel?

    Backing is a length of strong, thin line that is attached to the spool of a fly reel before the fly line. It serves several important purposes in fly fishing. Firstly, backing provides extra line capacity, allowing you to fight larger fish that may take long runs. Secondly, it prevents the fly line from slipping off the spool when under tension. Finally, backing acts as a buffer, reducing the strain on the fly line and protecting it from wear and tear.

  5. How much backing do I need for my fly reel?

    The amount of backing required depends on various factors, including the size of your fly reel, the type of fish you’re targeting, and the fishing conditions. As a general guideline, most fly reels can accommodate 100 to 200 yards of backing. However, if you plan to fish for larger species or in situations where the fish may make long runs, you may need more backing. It’s crucial to consult the reel manufacturer’s recommendations or seek advice from experienced anglers familiar with your fishing location.

  6. What type of backing should I use for my fly reel?

    There are various types of backing available for fly reels, including braided Dacron, gel-spun polyethylene, and nylon. Braided Dacron is the most commonly used and affordable option. It offers good strength, is easy to handle, and provides sufficient backing capacity for most fly fishing scenarios. Gel-spun polyethylene is a high-strength, thin backing that offers exceptional capacity but is more expensive. Nylon backing is less common but still used by some anglers. Ultimately, the choice of backing material depends on personal preference, budget, and the specific fishing situations you anticipate.

  7. How do I attach backing to my fly reel?

    To attach backing to your fly reel, follow these steps:
    Start by tying an arbor knot to secure the backing to the reel’s arbor (the central spindle).
    Wrap the backing around the arbor and tie an overhand knot.
    Pull the knot tight, ensuring it’s secure.
    If desired, apply a drop of fly line backing adhesive to the knot for added security.
    Wind the backing tightly onto the reel, making sure it is evenly distributed across the spool.
    Attach the fly line to the backing using a backing-to-fly line loop-to-loop connection or a nail knot.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *